Product name: MN MODEL MN38 RC Car Original part Metal Rear Bone Dog Shaft

Quantity: 1set

Applicable MODEL: MN MODEL MN38

MN MODEL MN38 RC Car Original part Metal Rear Bone Dog Shaft Status Check:

1. Appearance inspection to see if the drive shaft has obvious wear, deformation, cracks or other signs of damage. Pay special attention to whether the connection of the drive shaft is loose or falling off.

2. Balance check, install the drive shaft on the support, rotate the drive shaft, and observe whether it rotates smoothly. If the drive shaft produces significant wobble or unbalance, a balance correction may be required.

3. Coupling inspection, check whether the coupling at both ends of the drive shaft is intact, without damage or compression deformation. Also check that the coupling connection is tight.

4. Universal-joint inspection, check whether the universal-joint (U-joint) in the transmission shaft is cracked, deformed or loose. In addition, check the degree of lubrication of the universal joint, and add lubricating oil if necessary.

5. Joint inspection, the joint of the drive shaft is easy to accumulate dirt and debris, should be cleaned and checked the tightness of the joint. Also check the joint bearing of the drive shaft for abnormal wear or loosening.

6. Test check, after the drive shaft check, test run to verify the working state of the drive shaft.

MN38 related function description:

1. The whole car is equipped with cool lights, including vehicle lights, air conditioning lights, controllable headlights, linkage turn signals.

2. The whole car adopts 4-way remote control system, fine control and high sensitivity.

3. The whole vehicle adopts nylon shell, resistant to fall and wear. The interior of the car shell is painted in the whole shell, which is light in weight and will not lose the paint.

4. The whole car adopts the gyroscope body self-stabilization system. When the body loses control, the gyroscope will automatically correct the direction until the body recovers balance.